Skip to content
FREE SIGN
TOOLS
DESIGN YOUR
OWN SIGN
CUSTOM
NEON LOGOS
Free neon sign tools Live sign preview Artwork quotes

Tape out a wedding neon sign before you order

A 24 in board covers one quarter of a 96 in wall. A 32 in board covers one third. Tape both sizes onto the clear area, take the same photograph twice and compare them with people in the frame.

RETRP editorial ·

Tape marks define the board width on a fabric backdrop
Tape marks define the board width on a fabric backdrop · Illustration
On this page
Warm-white lettering on a wedding backdrop
Warm-white lettering on a wedding backdrop · Illustration

Measure the visible space

Measure between the flowers, posts and draping. Write down the width at the height where the sign will hang. A frame with a wide base can have a narrow usable area near the top. Record the board height from the proof as well as the width.

Use tape and a phone

Make the first rectangle with removable tape approved by the venue. Put a person where guests usually stand. Take a portrait and a wide photo. Repeat at the same camera position with the larger rectangle. If faces block the lower line, move the full outline and try again.

Save the decision before the setup

Write the finished board width and height, its center height from the floor, the lower edge clearance and the outlet position. Send the same drawing to the venue and the person setting up. A 36 in example exceeds RETRP’s 32 in standard width, so request a written quote if that is the size you choose.

Questions before you order

How wide should the sign be on an 8 ft backdrop?

Compare 24 in and 32 in at the same camera distance and place a person in the frame. Use the option that stays within your clear area and reads in the photo.

Do measurements include the glow?

The width to measure is the finished acrylic board. Record the visible lettering as a separate detail on the proof.

Sources: NIST length units · Wedding sizing discussion · ISA on sign visibility