On this page

Choose the viewpoints
Walk the route from each direction a customer normally approaches. Check the door, the window and any street furniture that blocks the view. Note the hours when sun or traffic reflections are most noticeable.
Make a temporary comparison
Hold a paper outline where the acrylic will sit. Look through the glass with the room lights at their normal setting. Place the outline in another part of the same window and compare. Keep OPEN short and separate from small specials or business-hour print if that copy competes for attention.
Check the operating routine
Ask staff to show where they can turn the sign on and off and where the cord will run. For an OPEN and CLOSED design, request a diagram of what shows in each state and when power returns. Have the installer confirm the fixing and exposure at the final location.
Questions before you order
Can I put an indoor sign outside the window?
Check the exposure of the full assembly at the proposed location. For any outdoor installation, ask for the build’s written use conditions.
What time should I test my shop window?
Check when glare is worst and again during opening hours after dark. Use the actual approach paths.
Sources: ISA factors of sign effectiveness · RETRP OPEN signs
